| Introduction to Switching & IOS |
| Building a Simple Network |
| Configuring a Switch Management Address |
| Navigating IOS |
| Configuring Initial Switch Settings |
| Implementing Basic Connectivity |
| Skills Integration Challenge |
| Using WireShark to view network traffic |
| Viewing the Swtich MAC address table |
| Viewing Network Device MAC addresses |
| Connecting a wired and wireless LAN |
| Examine the ARP table |
| Identifying Network Device & Cabling |
| Exploring Internetworking Devices |
| Connect a Router to a LAN |
| Troubleshooting Default Gateway Issues |
| Configure Inital Router Settings |
| Building a Switch & Router network |
| Basic Router & Switched Network |
| Accessing Network Devices with SSH |
| Create Basic Configuration in Notepad++ |
| Exploring Router Physical Characteristics |
| Designing & Implementing a VLSM Addressing Scheme |
| Calculating IPv4 Subnets |
| IPv6 Addressing |
| Troubleshooting IPv4 and IPv6 addressing |
| Subnetting Scenario 1 |
| Securing Network Devices |
| Static Subnetting and VLSM |
| Configuring IPv4 Static and Default Routes |
| Calculating Summary Routes with IPv4 & IPv6 |
| Configuring a Floating Static Route |
| Troubleshooting Static Routes Instruction |
| Examining Telnet and SSH in Wireshark |
| Configuring IPv4 Route Summarization |
| Configuring Secure Passwords and SSH |
| Configuring RIPv2 |
| VLAN configuring Router-on-a-stick |
| DHCP |
| Configuring DHCPv4 using Cisco IOS |
| NAT - Information |
| Configuring static NAT |
| NAT - Operation |
| NAT - Configuration - Static NAT |
| NAT - Configuration - Dynamic NAT |
| NAT - Configuration - NAT Overload |
| Subnetting |
| Basic Configurations |
| VLAN configuration |
| Routing |